| ||||||||||||||||||
| ||||||||||||||||||
|
IDENTITY: ( As Used on Label) exxantTM |
SECTION I - General Information
|
Manufacturer’s Name: LANG LABORATORIES, INC. |
Emergency Telephone Number: |
|
Address (Number, Street, City, State, & Zip Code)
|
Telephone Number for Information:
|
|
EPA Registration No.: 63709-1-71215 |
FAX Number: |
|
EPA Establishment No.: 71215-TX-1 |
Date Prepared: 10 March 2000 |
SECTION II - Hazardous Ingredients/Identity Information
|
HMIS HAZARD INDEX |
NFPA INDEX |
|
HEALTH: 0 |
HEALTH: 1 |
| FLAMMABILITY: 1 | FLAMMABILITY: 0 |
| REACTIVITY: 0 | REACTIVITY: 0 |
| PERSONAL PROTECTION: a | SPECIAL PRECAUTIONS: N/A |
|
Hazardous Components Other Limits (Specific Chemical Identity, Common Name) OSHA PEL ACGIH TLV Recommended % |
|
|
SDW Turpentine CAS# 8006-64-2 14.2 |
|
|
Ammonia CAS# 7664-41-7 0.2 |
|
SECTION III - Physical/Chemical Characteristics
| Boiling Point | 100o C (212o F) | Specific Gravity (H2O = 1) | 0.97(8.09PPG) |
| Vapor Pressure (mm Hg) | Melting Point | N/A | |
| Vapor Density | 33 - 34 |
Evaporation Rate (Butyl Acetate = 1) |
Similar to Water |
| Solubility in Water: Readily Dispersible in Water | |||
| Appearance and Odor: Amber to Red; Slight Ammonia Order | |||
SECTION IV - Fire and Explosion Hazard Data
|
Flash Point (Method Used) 100o C (212o F) |
Flammable Limits
|
LEL N/A |
UEL N/A |
|
Extinguishing Media: CO2, Powder, Foam, Water |
|||
|
Special Fire Fighting Procedures: |
|||
|
Unusual Fire and Explosion Hazards: None Known & Non-Explosive |
|||
SECTION V - Reactivity Data
| Stability | Unstable | -- |
Conditions to Avoid: |
| Stable |
X |
-- |
|
| Incompatibility: (Material to Avoid) Oxidizers and Chlorine | |||
| Hazardous Decomposition or Byproducts: None | |||
| Hazardous Polymerization | May Occur | -- |
Conditions to Avoid: |
| Will Not Occur |
X |
-- |
|
SECTION VI - Health Hazard Data
|
Route(s) of Entry Inhalation? Skin? EyeContact? Ingestion? X X X X |
| Health Hazards (Acute and Chronic) |
|
Acute: Skin Effects: Repeated and/or prolonged exposure may cause temporary irritation Eye Contact: May cause mild temporary irritation or redness Inhalation: May cause mild temporary irritation (Not probable) Ingestion: Non-Toxic, Non Poisonous |
| Chronic: No long term effects are expected or recognized |
| Carcinogenicity: N/A |
| Signs and Symptoms of exposure: None Known or Expected |
| Medical Conditions Generally Aggravated by Exposure: None |
|
Emergency and First Aid Procedures: Skin Contact: Wash with mild soap and water. If irritation persists, contact physician. Eye Contact: Flush with running water and/or use a mild saline solution. If irritation persists, contact a physician. Inhalation: Remove to fresh air. |
SECTION VII - Precautions for Safe Handling and Use
|
Steps to Be Taken in Case Material is Released or Spilled: Ventilate area. Flush large spills of material into suitable retaining area or containers, with water. Small spills may be absorbed with paper towels or appropriate inert absorbing materials (attapulgite, bentonite, or other absorbent clay) or be left to evaporate. |
|
Waste Disposal Method: Dispose of absorbents by discarding in trash. No special waste disposal required. |
|
Precautions to Be Taken in Handling and Storing: Do not store near flames or at elevated temperatures. Read carefully all cautions and directions on product label and accompanying literature. Since empty container may contain residue, do not reuse. Rinse thoroughly before discarding in trash. |
|
Other Precautions: Keep Out of the Reach of Children Avoid Contact with eyes and skin. Do not ingest. |
SECTION VIII - Control Measures
| Respiratory Protection (Specify Type) | ||
| Ventilation | Local Exhaust: N/A | Special: N/A |
| Mechanical (General) N/A | Other: No special ventilation is required when product is used according to label directions. | |
| Protective Gloves: Gloves may be worn but are not required. | Eye Protection: Safety glasses or goggles not required but recommended. | |
| Other Protective Clothing or Equipment: For application of this product, follow label instructions. No Special Equipment is Required. | ||
| Work/Hygienic Practices: Wash hands thoroughly with mild soap and warm water, after use. | ||
SECTION IX - Efficiency and Safety Testing (Accepted by EPA)
|
DATE |
FACILITY |
PURPOSE OF TEST |
TEST RESULTS |
|
1990 |
USDA |
Efficiency - Florida |
98.7% - 2 applications - 8 weeks |
|
2000 |
Texas A&M |
Efficiency - Texas |
98.5% - 1 application - 33 days |
|
1990 |
DLT Laboratories |
Efficiency - Texas |
98% - 1 application - 2 weeks |
|
1990 |
Ana-Lab |
Reactivity/Explosion |
Non-reactive/Non-explosive |
|
1992-96 |
DLT Laboratories |
Efficiency - Ms/La/Tx |
98% - 100% 1 - 4 applications |
|
1991 |
Stillmeadows |
Oral Toxicity |
Non-Toxic, Non-Poisonous (Cat. IV) |
|
1991 |
Stillmeadows |
Acute Dermal Toxicity |
24 hr. Contact - Non-Toxic, non-Poisonous |
|
1991 |
Stillmeadows |
Eye Irritation |
No Irritation (Cat. IV) |
|
1991 |
Stillmeadows |
Dermal Irritation |
72 hr. Exposure - Slight irritation (Cat. IV) |
|
1996 |
DLT Laboratories |
Phototoxicity |
Non-Toxic to a wide variety of plants |
The information contained in this Material Safety Data Sheet (MSDS) is based on information considered accurate. No warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. Additionally, the Manufacturer assumes no responsibility for injury to the user caused by abnormal use of the material even if reasonable safety procedures are followed. The user assumes the risk in the use of this material.
Click on image to see actual size label
