|
IDENTITY:
( As Used on Label)
exxantTM |
SECTION
I - General Information
|
Manufacturer’s
Name: LANG
LABORATORIES, INC. |
Emergency
Telephone Number: |
|
Address
(Number, Street, City, State, & Zip Code)
P.O.
Box 565, Scottsville, Texas 75688-0565 |
Telephone
Number for Information:
(903)
938-2272 |
|
EPA
Registration No.: 63709-1-71215 |
FAX
Number: (903) 938-1445 |
|
EPA
Establishment No.: 71215-TX-1 |
Date
Prepared: 10 March 2000 |
SECTION
II - Hazardous Ingredients/Identity Information
|
HMIS HAZARD INDEX |
NFPA INDEX |
|
HEALTH:
0 |
HEALTH:
1 |
| FLAMMABILITY:
1 |
FLAMMABILITY:
0 |
| REACTIVITY:
0 |
REACTIVITY:
0 |
| PERSONAL
PROTECTION:
a |
SPECIAL
PRECAUTIONS: N/A |
|
Hazardous
Components
Other Limits
(Specific
Chemical Identity, Common
Name) OSHA PEL
ACGIH TLV
Recommended % |
|
SDW
Turpentine CAS#
8006-64-2
14.2 |
|
Ammonia
CAS#
7664-41-7
0.2 |
SECTION
III - Physical/Chemical Characteristics
| Boiling Point |
100o C (212o
F) |
Specific Gravity (H2O
= 1) |
0.97(8.09PPG) |
| Vapor Pressure (mm Hg) |
|
Melting Point |
N/A |
| Vapor Density |
33 - 34 |
Evaporation
Rate
(Butyl
Acetate = 1) |
Similar
to Water |
| Solubility in
Water: Readily Dispersible in Water |
| Appearance and
Odor: Amber to Red; Slight Ammonia Order |
SECTION
IV - Fire and Explosion Hazard Data
|
Flash
Point (Method Used)
100o
C (212o F) |
Flammable
Limits
|
LEL
N/A |
UEL
N/A |
|
Extinguishing
Media: CO2, Powder, Foam, Water |
|
Special
Fire Fighting Procedures: |
|
Unusual
Fire and Explosion Hazards: None Known & Non-Explosive |
SECTION
V - Reactivity Data
| Stability |
Unstable |
-- |
Conditions to Avoid: |
| Stable |
X |
-- |
| Incompatibility:
(Material to Avoid) Oxidizers and Chlorine |
| Hazardous
Decomposition or Byproducts: None |
| Hazardous
Polymerization |
May Occur |
-- |
Conditions to Avoid:
|
| Will Not Occur |
X |
-- |
SECTION
VI - Health Hazard Data
|
Route(s)
of
Entry
Inhalation?
Skin?
EyeContact?
Ingestion?
X
X
X
X |
| Health Hazards (Acute
and Chronic) |
|
Acute:
Skin Effects: Repeated and/or prolonged exposure may cause temporary
irritation
Eye Contact: May cause mild temporary irritation or redness
Inhalation: May cause mild temporary irritation (Not probable)
Ingestion: Non-Toxic, Non Poisonous |
| Chronic: No long term
effects are expected or recognized |
| Carcinogenicity:
N/A |
| Signs and Symptoms of
exposure: None Known or Expected |
| Medical Conditions Generally
Aggravated by Exposure: None |
|
Emergency
and First Aid Procedures:
Skin
Contact: Wash with mild soap and water. If irritation
persists, contact physician.
Eye
Contact: Flush with running water and/or use a mild
saline solution. If irritation persists, contact a physician.
Inhalation:
Remove to fresh air. |
SECTION
VII - Precautions for Safe Handling and Use
|
Steps
to Be Taken in Case Material is Released or Spilled:
Ventilate
area. Flush large spills of material into suitable retaining area or
containers, with water. Small spills may be absorbed with paper towels or
appropriate inert absorbing materials (attapulgite, bentonite, or other
absorbent clay) or be left to evaporate. |
|
Waste
Disposal Method:
Dispose
of absorbents by discarding in trash. No special waste disposal required. |
|
Precautions
to Be Taken in Handling and Storing:
Do
not store near flames or at elevated temperatures. Read carefully all
cautions and directions on product label and accompanying literature.
Since empty container may contain residue, do not reuse. Rinse thoroughly
before discarding in trash. |
|
Other
Precautions:
Keep
Out of the Reach of Children
Avoid
Contact with eyes and skin. Do not ingest. |
SECTION
VIII - Control Measures
| Respiratory
Protection (Specify Type) |
| Ventilation |
Local Exhaust: N/A |
Special: N/A |
| Mechanical (General) N/A |
Other: No special
ventilation is required when product is used according to label
directions. |
| Protective
Gloves: Gloves may be worn but are not required. |
Eye Protection: Safety
glasses or goggles not required but recommended. |
| Other Protective
Clothing or Equipment: For application of this product, follow label
instructions. No Special Equipment is Required. |
| Work/Hygienic
Practices: Wash hands thoroughly with mild soap and warm water, after
use. |
SECTION
IX - Efficiency and Safety Testing (Accepted by EPA)
|
DATE |
FACILITY |
PURPOSE
OF TEST |
TEST
RESULTS |
|
1990
|
USDA
|
Efficiency
- Florida |
98.7%
- 2 applications - 8 weeks |
|
2000 |
Texas
A&M |
Efficiency
- Texas |
98.5%
- 1 application - 33 days |
|
1990 |
DLT
Laboratories |
Efficiency
- Texas |
98%
- 1 application - 2 weeks |
|
1990 |
Ana-Lab |
Reactivity/Explosion |
Non-reactive/Non-explosive |
|
1992-96 |
DLT
Laboratories |
Efficiency
- Ms/La/Tx |
98%
- 100% 1 - 4 applications |
|
1991 |
Stillmeadows |
Oral
Toxicity |
Non-Toxic,
Non-Poisonous (Cat. IV) |
|
1991 |
Stillmeadows |
Acute
Dermal Toxicity |
24
hr. Contact - Non-Toxic, non-Poisonous |
|
1991 |
Stillmeadows |
Eye
Irritation |
No
Irritation (Cat. IV) |
|
1991 |
Stillmeadows |
Dermal
Irritation |
72
hr. Exposure - Slight irritation (Cat. IV) |
|
1996 |
DLT
Laboratories |
Phototoxicity |
Non-Toxic
to a wide variety of plants |
The information contained in this Material Safety
Data Sheet (MSDS) is based on information considered accurate. No warranty is
expressed or implied regarding the accuracy of this data or the results to be
obtained from the use thereof. Additionally, the Manufacturer assumes no
responsibility for injury to the user caused by abnormal use of the material
even if reasonable safety procedures are followed. The user assumes the risk in
the use of this material.

Click on image to see actual size label